Canning Line and Supportive Equipment

Descriptions

Cardiff Distillery are seeking quotations for each of the below equipment/machinery. We would like each quote to include costs for training and testing. Experience in the industry is important and having an understanding on the status of ordering is required.The canning line must include:CP10 10 counter pressure with a 10 head twin lane filler, with x2 electronic seamer based on a 330ml can size.The machine must be able to can into 150ml and 250ml can sizesA microcan linear wrap label applicator that is compatible to CP10 machine or similar model.Date coder to print on bottom of cansHalf pallet size infeed with 2 twist cages included for 150ml and 250ml cansA rotary collection table (900mm)CompressorDelivery, set up and training fee must also be includedChiller for Canning LineA packaged air cooled I- chiller1 off independent refrigeration circuit1 off scroll compressor1 step of capacity controlIntegral immersed coil type evaporator incorporated within a 255 litre buffer vessel2 off axial fansGeneral alarm fault terminalsRemote start / stop terminalsMicroprocessor controller (complete with weather-proof panel)Mains isolator - Full R410A refrigerant charge - 400v / 3ph. / 50Hz power supplyIP54 protection rating - Phase monitor - Compressor crankcase heater - Electronic expansion valveThe chiller must be compatible with the canning line.Tanks for a canning lineFermentation Tank (1000L) X1Fermentation Tank (2700L)X5Hot Liquor Tank (500L)3T/H Hot Liquor Tank4000 L Cold Liquor Tank5T/H Cold Liquor Pump500L Alkali Tank5T/H Washing PumpPLC ControlStainless Steel Pipeline ValveNOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at https://www.sell2wales.gov.wales/Search/Search_Switch.aspx?ID=132154.