Closed
Dyffryn House Redevelopment - Design and Build of a Waste Transfer Station Facility
Request tender documents
Save your time. You just request and we will send you the available documents.
Request for bid service
Save your time. You just request and we will arrange tender related all available documents to bid writers for the best possible quote.
Descriptions
The Authority intends to construct a Waste Transfer Station (WTS) facility at the site of Dyffryn House, which is situated within the Dyffryn Industrial Estate, Ystrad Mynach. The site is located at National Grid Reference ST 151927, west of the A469 in Ystrad Mynach, Hengoed.Dyffryn House is a large portal-framed building, with two-storey offices on the front of the building (west side) and a single storey warehouse at the rear of the building (east side). Dyffryn House was constructed in the mid-1990s as a paper/magazine-printing centre under the ownership of St Ives.The WTS will be located in the south east quarter of the existing Dyffryn House building. The WTS will handle approximately 70,000 tonnes of waste per year from the region and will have a total annual capacity of up to 90,000 tonnes a year.Based on data from 2011/12, the 70,000 tonnes a year waste stream will comprise of:·Approximately 20,000 tonnes/year dry mixed recyclables (glass, mixed plastics, cardboard, paper, cans etc);·Approximately 15,000 tonnes/year of green and food waste;·Approximately 35,000 tonnes/year of residual waste (black bag waste).The separate waste streams will be transferred into larger bulk transporters and waste recovery will take place elsewhere. Waste will be removed from the site daily.A weighbridge will be located outside the Dyffryn House building for the use of refuse collection vehicles (RCVs) and bulk transporters.The construction of the existing building comprises wall cladding, roof cladding and an internal ground concrete slab. A condition survey of the existing building carried out in April 2013 established that the structure and the building fabric were in a good condition and there is no need to replace it.Mechanical services of the building are in reasonable condition for their age, it is likely however that some mechanical services, i.e compressed air system, hot and cold water systems, ventilation and drainage and possibly heating and fire hoses will have to be replaced to conform to the latest regulations? Most of the electrical services will have to be replaced.The current warehouse area of the Dyffryn House is proposed to be redeveloped so it accommodates a WTS in the south-east quarter of the building. The RCVs (and with them the waste) are proposed to enter/exit the site through the south entrance, and enter/exit Dyffryn House on the south-east corner of the building, nearest to the WTS area; therefore the presence of the waste is limited to the southeast corner of the building.The construction within the building will consist of:-The bitmac surfacing of the internal waste carriers access road;-The installation of a weighbridge;-The construction of reinforced concrete push walls;-The erection of a steel ramp.-Ancillary drainage works; and-Security fencing.The preferred method of procurement in this respect is via a design and build contract, it is anticipated that this facility will be fully operational by March 2016 and in order to achieve this timescale the Authority is working towards running a Pre Qualification Questionnaire (PQQ) exercise in March 2015 with the tendering process commencing in April 2015 with a goal of awarding this contract at the beginning of June 2015. The restricted procurement process will be undertaken in accordance with the Authority's Standing Orders for Contracts.NOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at http://www.sell2wales.gov.uk/Search/Search_Switch.aspx?ID=21672.
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
71334000 - Mechanical and electrical engineering services
71322000 - Engineering design services for the construction of civil engineering works
35111500 - Fire suppression system
45210000 - Building construction work
45200000 - Works for complete or part construction and civil engineering work
42924790 - Odour-masking apparatus
71321000 - Engineering design services for mechanical and electrical installations for buildings
51100000 - Installation services of electrical and mechanical equipment
45221117 - Weighbridge construction work
45331210 - Ventilation installation work
45222110 - Waste disposal site construction work
45232470 - Waste transfer station
63712500 - Weighbridge services
Keywords
masonry
motor install
general building
turnkey projects
M&E consultancy
public works
new buildings
M&E engineering
infrastructure
site preparation
earthworks
pump mounting
generator wiring
ductwork fitting
superstructure
industrial deodorisers
building projects
security system mount
M&E technical services
scent masking units
residential construction
sprinkler systems
electrical panel mount
deodorization systems
fire protection systems
civil engineering design
architectural building
control panel fitting
odor control devices
general contracting
HVAC ventilation setup
road and bridge design
odor masking equipment
loaded-lorry weighing
weigh station management
MEP design services
weighbridge construction
waste logistics station
fire suppression system
refuse site build
construction work
structural construction
waste containment area
shell construction
axle-load measurement
waste handling hub build
civil engineering
vehicle weighing service
HVAC system setup
technical civil design
weighbridge inspection
energy systems design
air quality reactors
engineered landfill cell
controlled waste site
integrated M&E services
sanitary landfill
landfill construction
structural planning
gas suppression systems
fire system units
M&E installation design
waterworks design
building erection
municipal dump site
switchgear commissioning
truck weighing facility
HVAC design consultancy
public works engineering
truck scale operation
disposal ground build
automatic fire suppression
transfer station facility erection
infrastructure blueprint services
airflow infrastructure build
M&E design and maintenance
industrial weighing structure
technical services layouts
utility infrastructure planning
garbage transfer facility
vehicle scale platform build
building engineering design
mechanical electrical coordination
mechanical and electrical systems design
cargo weight verification
emergency suppression systems
highway weighbridge installation
electrical design for buildings
fire extinguishing system
refuse depot construction
weigh station infrastructure
truck weigh station erection
waste-transfer station build
construction engineering consultancy
heavy vehicle scale platform
tipping site construction
mechanical electrical installation
civil project technical design
sanitary waste depot build
mechanical & electrical planning
building services engineering
indoor air circulation installation
building systems engineering
mechanical ventilation fitting
commercial building works
municipal waste transfer infrastructure
compressor foundation alignment
air exchange system install
environmental waste hub build
weighbridge calibration service
fire suppression installation
commercial vehicle weigh-in
weigh in motion bridge build
refuse collection center construction
industrial weighbridge facility
solid waste disposal area
suppression control equipment
mechanical systems engineering
HVAC and electrical engineering
ventilation equipment installation
freight weigh station build
conveyor belt installation
Workflows
Status :
Procedure :
Suitable for SME :
Nationwide :
Assign to :
Tender Progress :
Details
Notice Type :
