Elmer Square - Natural Stone Planters

Descriptions

The Authority is seeking a Supplier to provision the following: To supply to site forum planter units as per the following detail: ·6 number planter units as per drawing SBCC11082-101-SBC-F-3001 Revision B ·All units at 400mm wide on plan. ·Highest unit size 650mm with 500mm showing above ground level with 150mm below ground level. Transition units size 650mm declining down to 160mm over indicted line length. Lowest units size at 160mm with 10mm above ground level and 150mm below ground level. ·All base units to have 4 number fixed stainless steel rods located in the top surface for means of securing/bonding the top section units on site. ·Component drawing to be supplied for each planter units and completed stone units marked up to match component drawing. ·All units will be manufactured from Scoutmoor Sandstone with a honed finish to all seen faces. ·All vertical joint sizes to be 10mm. ·Stainless Steel rod will be 20mm diameter resin bonded into base units at 40mm proud of top surface.