Open Closing in a 16 days
Fourier Transform Infrared (FTIR) Spectroscopy System
Descriptions
The design and manufacture of a Fourier Transform Infrared (FTIR) Spectroscopy System.
High level functional requirements as per below:
1. The FTIR equipment shall be capable of measuring the corrosion thickness on samples up to 10 µm.
2. The FTIR rig shall be operated remotely.
3. The FTIR equipment shall be capable of being operated in conjunction with an XY table, allowing the complete area of the sample to pass over the FTIR sampling area.
4. The probe head of the FTIR equipment must protrude from the end of the spiral wall plug to which it is fitted in order to allow the sample to be presented up to the probe with a clearance of 0.4mm +/- 0.1mm.
5. The probe head of the FTIR equipment shall be protected from damage that samples being pushed against it could cause.
6. The FTIR equipment shall include a desktop computer and software to support the analysis and display the results from the FTIR equipment.
7. The FTIR equipment shall be designed to withstand the in-cell environment.
• Radiation In-cave: 30Gy/hour at 30cmo Out-of-cave: 10µGy/hour at 30cm
• Temperature In-cave: 5°C to 45°Co Out-of-cave: 5°C to 35°C• All equipment shall operate in relative humidity of5% to 95% non-condensing.
• All equipment shall operate at atmospheric pressure.
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
42000000 - Industrial machinery
Keywords
industrial machinery
heavy machinery
production machinery
manufacturing equipment
industrial plant machinery
factory machinery
processing machinery
workshop equipment
industrial engines
plant machinery
Tender Lot Details
2 Tender Lots
Workflows
Status :
Procedure :
Suitable for SME :
Nationwide :
Assign to :
Tender Progress :
Details
Notice Type :
Tender Identifier :
Tenderbase ID :
Low Value :
High Value :
Buyer Information
Procurement contact
Name :
Phone :
Email :
Possible Competitors
1 Possible Competitors
