LAB001LTU Autoclaves for Biomed

Descriptions

The university requires two autoclaves to be used for general laboratory biohazard waste disposal (fluids, plastics, agar plates, etc.). Both autoclaves shall: •Be fully installed and commissioned by 8th September 2023 •Come with minimum 12-month warranty •Come with maintenance contract Main autoclave: •Minimum sterilisation of 121 degrees for 15 minutes •Minimum 200 litre capacity •Plumbed in •Square chamber •Pre- and post-vacuum system •Internal steam generator •Steam jacket •Vertical sliding door •Water softener discard box •Maximum External Dimensions of machine: Width = 760mm, Height = 1900mm, Depth = 1650mm (including pipework) •Must fit through doorway entrance (both inner and outer doors): 770mm Existing on-site services: •Mains water supply •3 phase (63Amp) electrical power •Drainage Small autoclave: •Minimum sterilisation of 121 degrees for 15 minutes •Minimum 40 litre capacity with electrically heated elements. •No plumbing requirements. •Maximum External Dimensions of machine: Width = 600mm, Height = 725mm, Depth = 775mm •Stand included to hold autoclave at a height of at least 900mm above floor. The procurement will be conducted exclusively via the university's e-tendering website, where all documentation can be found and downloaded: https://neupc.delta-esourcing.com/members/leeds-trinity-university/ Accessing a Tender Opportunity via the university's e-tendering website: Once you have created a supplier profile, to respond to an opportunity, click 'Response Manager' or 'View Invites and Responses'. You will then be presented with a list of all opportunities your organisation has previously worked on and be given the option of viewing current invites or entering the access code to begin responding to a new opportunity Note: Project: LAB001LTU Autoclaves for Biomed Opening Date : 06/04/2023 09:00 Closing Date : 02/05/2023 10:00 Access Code : 8429SB7Z35