Closed
Mechanical and Electrical Engineering Services within a Partnering Arrangement
Descriptions
The provision of mechanical and electrical services. This will include provision of Building works associated with specific installations where they are as a result of or in association with the primary installation works (i.e. forming bases for boiler installations, making good after installations)., The work involved falls under the following main headings and will relate to all properties whether domestic or non-domestic:, •Reactive (Day to Day) Maintenance work, •Planned Preventative/Cyclical Maintenance including Servicing of Installations, •Follow on Works, •Minor Works & Capital Project Work, •Out of Hours Emergency Service, All works except for Project Works and Programmes will be delivered under the NEC4 Facilities Management Contract. Projects and Programmes of Projects will be delivered under the NEC4 Engineering & Construction Contract., Works generally relate to both non-domestic and domestic properties and the following types of plant and equipment, however, this list is not exhaustive:, •electrical installations, •mechanical installations, •gas installations, •heating and ventilation , •fire alarms, •emergency lighting, •lightning protection, •air conditioning , •air handling , •extraction systems (including fume cupboards) , •stage lighting , •commercial and domestic catering equipment, •ground Source/ Air Source Heat Pumps / Biomass Boilers , •distribution pipe work and cables including underground services (i.e. gas, water, electrical), •hot and cold water installations, •thermostatic mixer valves (TMV's), •reduced pressure zone valves (RPZ) valves, •sewage equipment, •communication and data infrastructures., •security, Intruder alarms, CCTV and door access / control., •portable fire-fighting equipment, •fire suppression systems, •fire protection associated with any works undertaken, •fire sprinkler systems, hydrants, dampers, •electrical portable appliance testing, •periodic electrical installation testing in line with statutory obligations, •control equipment , •substations, •standby generators , •automatic doors, roller shutters, access control systems, automatic gates and barriers, and door systems, •laboratory gas taps, •refrigeration plant, •lifting equipment & hoists, •fall arrest systems, •school cleaning equipment, •installation testing and commissioning , •improved energy and sustainability (i.e. decarbonisation, electric charge points etc.) , •lifts may be added at a later date
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
50710000 - Repair and maintenance services of electrical and mechanical building installations
90400000 - Sewage services
50500000 - Repair and maintenance services for pumps, valves, taps and metal containers and machinery
50413200 - Repair and maintenance services of firefighting equipment
50420000 - Repair and maintenance services of medical and surgical equipment
50750000 - Lift-maintenance services
35100000 - Emergency and security equipment
90650000 - Asbestos removal services
51000000 - Installation services (except software)
50411200 - Repair and maintenance services of gas meters
50720000 - Repair and maintenance services of central heating
45000000 - Construction work
50413100 - Repair and maintenance services of gas-detection equipment
71000000 - Architectural, construction, engineering and inspection services
50411100 - Repair and maintenance services of water meters
50411300 - Repair and maintenance services of electricity meters
Keywords
emergency equipment
security gear
rescue equipment
safety equipment
emergency response kits
security systems
rescue gear
safety devices
crisis equipment
emergency response hardware
construction work
building construction
civil engineering
infrastructure projects
site construction
building sites
structural work
construction services
renovation work
public works
water meter calibration
seal replacement
leak detection repair
meter reading accuracy check
valve lubrication
flow rate testing
casing inspection
water pulse sensor fix
housing gasket seal
meter rev-counter reset
gas meter testing
diaphragm repair
gas pressure calibration
flow regulator adjustment
leak sealing
meter valve servicing
pilot light sensor test
metering accuracy audit
meter overhaul
burner valve check
electricity meter recalibration
circuit board repair
pulse output testing
tamper detection sensor fix
current transformer check
meter accuracy certification
firmware upgrade
meter housing seal
display indicator recalibration
energy usage correction
gas detector calibration
CO/CO₂ sensor replacement
alarm system repair
gas leak analyzer testing
detection module firmware update
gas sensor housing fix
safety monitor recalibration
field gas checker service
battery module replacement
alert threshold tuning
fire alarm calibration
extinguisher servicing
suppression system testing
sprinkler head replacement
fire pump inspection
hydrant flow test
alarm panel diagnostics
nozzle cleaning
foam system check
emergency lighting maintenance
MRI coil testing
X-ray tube replacement
autoclave sterilization check
endoscope calibration
defibrillator service
surgical drill maintenance
ventilator inspection
ECG lead replacement
infusion pump tune-up
surgeon lamp alignment
pump overhaul
valve servicing
faucet calibration
container welding
machinery upkeep
pump seal replacement
valve actuator check
tap valve refurbishment
metal tank repair
equipment maintenance
cable tray service
motorized door repair
switchgear calibration
HVAC blower maintenance
lift control panel fix
mechanical damper servicing
emergency lighting inspection
pump motor overhaul
genset diagnostics
fan coil unit tune-up
boiler heat exchanger clean
radiator bleed valve service
zone valve replacement
thermostat calibration
circulating pump fix
central heating pipe insulation
water quality flush
heating system balancing
expansion vessel check
control thermostat tune
elevator door sensor calibration
hoist rope inspection
control system firmware update
brake pad replacement
lift gearbox oil change
weight load testing
safety circuit diagnostics
cabin lighting fix
emergency phone testing
lift alignment service
on-site assembly
fixture installation
equipment alignment
control panel setup
piping system installation
lighting fixture mounting
non-software integration
hardware commissioning
structural bracket installation
mechanical anchor setup
architectural services
building engineering
technical design
construction consultancy
structural engineering
inspection services
surveying
planning consultancy
facility design
sewer operation
wastewater handling
sewage network management
effluent transport
urban sewage services
sewerage operation
wastewater logistics
sewage pipeline services
sewer network care
sewage dispatch
asbestos abatement
hazardous material removal
friable asbestos extraction
asbestos remediation
building hazardous cleanup
certified asbestos disposal
asbestos demolition support
protective hazmat removal
asbestos fiber cleanup
hazardous dust elimination
Tender Lot Details
2 Tender Lots
Workflows
Status :
Procedure :
Suitable for SME :
Nationwide :
Assign to :
Tender Progress :
Details
Notice Type :
Tender Identifier :
Tenderbase ID :
Low Value :
High Value :
Buyer Information
Procurement contact
Name :
Phone :
Email :
Possible Competitors
1 Possible Competitors
