mWave GNSS positioning & compass supply

Descriptions

Require the supply of a GNSS compass and radio telemetry system with the following requirements:•GPS heading accuracy =/- 0.5°•Wireless transmit to installation vessel 100-200m•The system needs to be self-contained, with enough battery capacity for 24hours operation•Water proof to IP66 or greater The Compass (IP66) could be mounted inside a suitable IP66 pressure proof enclosure if made of GRP or moulded plastic (transparent to GPS signals) e.g. peli case•Single use product would like to keep the system as low cost as possible.•The radio receiver would output to a laptop for data display or into the survey software which will accept RS232 NMEA GGA/HDT strings•The system should be self contained so that it can be released during the mWave installation and retrieved by a vesselNOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at https://www.sell2wales.gov.wales/Search/Search_Switch.aspx?ID=109188.