Semi Automatic Euro Pallet Line

Descriptions

27 Track 1600 nailing machine with shuttle table jig feed. The nailing machine will include automatic table raising to rails, pallet take off system and gantry mounted to the back of the machine for easy loading of nail hoppers. The nail hoppers and feeders will be mounted as 9 track, 12 track, 9 track with disc type picking system.Turnover and turntable to be mounted at the back of the nailing machine to receive the completed pallet. The pallet will travel on twin chain conveyors to be turned over and then turned 90 degrees for the correct block positioning before branding.Automatic six head branding machine for the marking of pallets. The machine will have twin chain conveyors with the control panel consisting of six external digital thermostats and timer for the control of heat to each branding head.Automatic four saw corner cutting machine for the removal of pallet corners. The saw motors will be brake assisted for the fast stopping of saw blades to meet with PUWER regulations.In line board chamfering machine with three sets of twin cutters. This is a new style of machine where the pallet is fed into the chamfering area on a powered roller system and then pulled through the cutters. This gives an even, smooth cut without leaving marks on the top deck. The cutters can be pneumatically lowered when not needed so the feeding of perimeter base pallets can be done without having to install an extra set of conveyors.Automatic pallet stacking machine for the finished pallets. The height can be set to a pre-determined figure before being released onto an outfeed conveyor.4 metre out-feed conveyors for the accumulation of completed pallet stacks.NOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at http://www.sell2wales.gov.uk/Search/Search_Switch.aspx?ID=22363.