Open Closing in a 22 days
80 mm Vacuum Insulated Control Valve
Request tender documents
Save your time. You just request and we will send you the available documents.
Request for bid service
Save your time. You just request and we will arrange tender related all available documents to bid writers for the best possible quote.
Descriptions
HSE require an 80 mm valve for an experimental programme. The valve must be suitable for liquid hydrogen service (down to 20 K) and have pneumatic actuation (open/closed). The valve should have an Ex d position indicator rated for ATEX Zone 1 suitable for hydrogen use. The valve should have flanged connections (ANSI class 300). The valve body should have a maximum allowable working pressure of 40 barg. There should be a section of 3" pipe with a 1/4" BSP boss, either welded between the valve and flange, or as a separate flanged section on ANSI class 300 flanges. Suitable gaskets and associated flange calculations must be provided. Nominal process conditions: Hydrogen, 50 - 70 K, 0 - 1.5 kg/s, 0 -12 barg The equipment is required for use at the HSE Buxton (SK17 9JN) test site. The equipment is required to be delivered before August 2026.
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
Keywords
fluid conduit
supply network
PLC equipment
transport pipework
control system hardware
automation sensors
industrial controllers
protective casing
industrial tubing
process management devices
Tender Lot Details & Award Criteria
1 Tender Lots
Workflows
Status :
Procedure :
Suitable for SME :
Nationwide :
Assign to :
Tender Progress :
Details
Notice Type :
Buyer Information
Name :
