Open Closing in a 6 days
Church Lane Car Park Drainage
Descriptions
To install 3 large drainage soakaways in grass verges surrounding the car park.
Site welfare, herras fencing etc.
Clear vegetation from works areas and dispose to licenced facility.
Locate utilities within the works area and divert if necessary (local electric cable likely).
Take up existing kerbs as required, and set aside for re-use.
Construction of soakaway 1:
Excavate existing surface to formation level and dispose of surplus to licenced facility,
Import, lay and compact sand / gravel surround on Terram 1000,
Lay infiltration crates wrapped in permeable membrane, with access module,
Backfill with Type 3 aggregate,
Lay geogrid (Bodpave 40 or similar approved) complete with gravel infill and topsoiled verge,
Relay 5Lm of bullnose kerb.
Construction of soakaway 2:
Excavate existing surface to formation level and dispose of surplus to licenced facility,
Import, lay and compact sand / gravel surround on Terram 1000,
Lay infiltration crates wrapped in permeable membrane, with access module,
Backfill with Type 3 aggregate,
Lay permeable membrane and topsoil around access cover,
Install MD200 channel drain and 100mm outfall pipe.
Construction of soakaway 3:
Excavate existing surface to formation level and dispose of surplus to licenced facility,
Import, lay and compact sand / gravel surround on Terram 1000,
Lay infiltration crates wrapped in permeable membrane, with access module,
Backfill with Type 3 aggregate,
Lay geogrid (Bodpave 40 or similar approved) complete with gravel infill and topsoiled verge,
Relay 11Lm of hit & miss half batter / bullnose kerb.
Make good carpark pavement (including chipping) around works areas to match existing.
Site clearance, make good carpark pavement (including chipping) to match existing, inspections etc.
PROVISIONAL RATES:
Excavate 300mm subsoil and dispose of surplus to licenced facility. Import, lay and compact 300mm thick 6F1/6F2 capping layer.
Lay tarmac surface reinstatement (assume same construction as existing 70mm tarmac over 300mm type 1, including chipping) beyond extended section.
Import and lay 150mm thick topsoil with grass seed.
Supply new HB2 kerbs, and lay including haunching.
Supply new BN kerbs (25mm upstand), and lay including haunching.
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
45100000 - Site preparation work
45200000 - Works for complete or part construction and civil engineering work
45400000 - Building completion work
45500000 - Hire of construction and civil engineering machinery and equipment with operator
45300000 - Building installation work
Keywords
site preparation work
land clearing
excavation
site grading
demolition prep
earthworks
groundwork services
foundation prep
site leveling
preparatory works
construction works
civil engineering
building projects
infrastructure
public works
turnkey projects
structural construction
general contracting
site preparation
building installation
technical fit-out
interior system installation
service integration
construction finish works
MEP works
systems installation
building service deployment
final construction stage
interior infrastructure install
building completion work
finishing trades
interior and exterior finishing
completion civils
hire of construction machinery with operator
equipment rental with personnel
plant & operator hire
earthmoving equipment with operator
Tender Lot Details
2 Tender Lots
Workflows
Status :
Procedure :
Suitable for SME :
Nationwide :
Assign to :
Tender Progress :
Details
Notice Type :
Tender Identifier :
Tenderbase ID :
Low Value :
High Value :
Buyer Information
Name :
Procurement contact
Name :
Phone :
Email :
Possible Competitors
1 Possible Competitors
