ITT for the provision of Air Compressor System Design

Descriptions

Due to expansion of the facility there is a requirement to install a new Compressed air system.The new projects air requirement is approximately 300CFM at 8 bar.The existing air usage is currently unknown and will be the responsibility of the successful tenderer to ascertain.This ITT should be read in conjunction with the relevant UK Standards:-The purpose of this ITT to carryout the design of a suitably sized compressed air system that will have approximately 30% spare capacity but will also have the ability to be increased for future developments at the facility.The system drop points will be identified during the site walkdowns, however the assumption can be made of one per room.The facility is approximately 6750m2 in size.The design document should be presented in the format that will allow Capestone to release in a further Invitation to Tender (ITT) for the procurement and install of the equipment.Format of provided documentation shall be as follows:-Pdf and MS Word for the design specificationAutoCAD (or equivalent) and pdf for drawings.NOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at https://www.sell2wales.gov.wales/Search/Search_Switch.aspx?ID=108320.The buyer has indicated that it will accept electronic responses to this notice via the Postbox facility. A user guide is available at https://www.sell2wales.gov.wales/sitehelp/help_guides.aspx.Suppliers are advised to allow adequate time for uploading documents and to dispatch the electronic response well in advance of the closing time to avoid any last minute problems.