Closed
Periodic Electrical Inspection and Testing to Domestic Properties
Descriptions
In accordance with the Procurement Policy Note 01/21 – Social Value in Procurement, this Contract will deliver measurable social value outcomes. Under this Procurement the Suppliers will be required to support the Contracting Authority's social value objectives. Accordingly, Contract performance conditions and/or Award Criteria may relate to social value.
The works to be provided under this contract will consist of Electrical Inspection and Testing of the 'fixed' electrical parts of electrical installations within NIHE's Domestic properties, to be checked (periodically inspected and tested) by a qualified and competent person within a 5-year planned cycle.
The electrical installations must meet the required standards, as per BS7671, the Requirements for Electrical Installations, set out within the IET Wiring Regulations 18th Edition, as amended and current at the time works.
The Contractors will record any non-compliances with BS7671, as amended and use observation classification codes, C1, C2, C3 and FI to indicate where remedial work and/or further investigation must be undertaken. If observations are made with the electrical installation, requiring classification codes C1, C2 and FI, then remedial work will be required, these remedial works should be undertaken by the Contractor during the completion of the inspection and testing.
Upon completion of the remedial works relating to observations classified as C1, C2 and FI, the Contractor must issue a fully completed Electrical Installation Condition Report with a Satisfactory overall assessment of the installation in terms of its suitability for continued use.
The Electrical Installation Condition Report is to be completed utilisng electrical certification computer software, that has the capability to produce and provide electronic copies of electrical installation and inspection and testing certificates, EICRs, fully compliant with the requirements of the Model Forms for Certification and Reporting contained within the IET Wiring Regulations, BS 7671, as amended and current at the time of the works.
This description is not exhaustive, refer to the Associated Tender Documents for full details regarding the scope.
Timeline
Pretender :
Pblished Date :
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
50710000 - Repair and maintenance services of electrical and mechanical building installations
71630000 - Technical inspection and testing services
50700000 - Repair and maintenance services of building installations
51110000 - Installation services of electrical equipment
71314100 - Electrical services
50000000 - Repair and maintenance services
51100000 - Installation services of electrical and mechanical equipment
50711000 - Repair and maintenance services of electrical building installations
71632000 - Technical testing services
Keywords
equipment repair service
preventive maintenance program
troubleshooting visit
onsite repair support
maintenance contract service
repair diagnostics
component replacement service
service schedule planning
emergency repair team
calibration service
plumbing fixture repair
electrical wiring diagnostics
HVAC servicing
ventilation duct cleaning
boiler system tune
gas pipe leak fix
fire alarm system calibration
sanitary installation maintenance
heating pump service
water system overhaul
cable tray service
motorized door repair
switchgear calibration
HVAC blower maintenance
lift control panel fix
mechanical damper servicing
emergency lighting inspection
pump motor overhaul
genset diagnostics
fan coil unit tune-up
circuit breaker reset
panel board servicing
emergency generator maintenance
outlet socket repair
lighting circuit diagnostics
switch replacement
electrical grounding check
distribution board upgrade
surge protector install
fault current testing
motor install
pump mounting
HVAC system setup
switchgear commissioning
conveyor belt installation
generator wiring
control panel fitting
security system mount
compressor foundation alignment
electrical panel mount
electrical panel mounting
wiring connection
cable tray installation
circuit breaker setup
outlet and switch fitting
meter board assembly
grounding rod installation
conduit routing
distribution board alignment
temporary power feed setup
electrical installations
electrical maintenance
wiring services
power distribution
electrical systems management
lighting installation
electrical repair works
circuit installation
electrical safety audits
power systems servicing
technical inspection
testing verification
performance validation
functional auditing
structural integrity checks
safety inspection
conformity evaluation
nondestructive testing
compliance auditing
quality verification
technical equipment testing
metrological verification
control instrument calibration
performance certification
prototype trial testing
system compliance validation
test bench analysis
calibration protocol application
Tender Lot Details
2 Tender Lots
Workflows
Status :
Procedure :
Suitable for SME :
Nationwide :
Assign to :
Tender Progress :
Details
Notice Type :
Tender Identifier :
Tenderbase ID :
Low Value :
High Value :
Buyer Information
Procurement contact
Name :
Phone :
Email :
Possible Competitors
1 Possible Competitors
