Open Closing in a 6 months
Periodic Electrical Wiring Inspections
Descriptions
The works to be provided under this contract will consist of Electrical Inspection and Testing of the ‘fixed’ electrical parts of electrical installations within NIHE properties, to be checked (periodically inspected and tested) by a qualified and competent person within a 5-year planned cycle. The electrical installations must meet the required standards, as per BS7671, the Requirements for Electrical Installations, set out within the IET Wiring Regulations Eighteenth Edition, as amended. The contractor will record any non-compliances with BS7671, as amended and use observation classification codes, C1, C2, C3 and FI to indicate where remedial work and or further investigation must be undertaken. If observations are made with the electrical installation, requiring classification codes C1, C2 and FI, then remedial work will be required, these remedial works should be undertaken by the Contractor during the completion of the inspection and testing. Upon completion of the remedial works relating to observations classified as C1, C2 and FI, the Contractor must issue an Electrical Installation Condition Report (EICR). The work also incorporates the replacement of Smoke and Heat detectors which have already achieved or will achieve a 10-year life within the next 1 year. Core Works which is Periodic Electrical Inspection and Testing including other Works, but not limited to, Electrical Installation Works, Fire Detection Alarm test and replacement Fire Detector’s, and Consultancy services associated with this contract when required. The information contained within this notice is indicative only and is subject to change at any time without notice.
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
Northern Ireland
CPV Codes
51110000 - Installation services of electrical equipment
71314100 - Electrical services
50000000 - Repair and maintenance services
50711000 - Repair and maintenance services of electrical building installations
Keywords
equipment repair service
preventive maintenance program
troubleshooting visit
onsite repair support
maintenance contract service
repair diagnostics
component replacement service
service schedule planning
emergency repair team
calibration service
circuit breaker reset
panel board servicing
emergency generator maintenance
outlet socket repair
lighting circuit diagnostics
switch replacement
electrical grounding check
distribution board upgrade
surge protector install
fault current testing
electrical panel mounting
wiring connection
cable tray installation
circuit breaker setup
outlet and switch fitting
meter board assembly
grounding rod installation
conduit routing
distribution board alignment
temporary power feed setup
electrical installations
electrical maintenance
wiring services
power distribution
electrical systems management
lighting installation
electrical repair works
circuit installation
electrical safety audits
power systems servicing
Tender Lot Details
2 Tender Lots
Workflows
Status :
Assign to :
Tender Progress :
Details
Notice Type :
Tender Identifier :
TenderBase ID :
Low Value :
High Value :
Region :
Attachments :
Buyer Information
Address :
Website :
Procurement Contact
Name :
Designation :
Phone :
Email :
Possible Competitors
1 Possible Competitors
