Open Closing in a 1 month

Servicing and Maintenance of Medical Gas Pipeline Systems (MGPS) at Nottingham City Hospital

Descriptions

The Nottingham University Hospitals NHS Trust (The Authority) requires a Supplier for the provision of Servicing and Maintenance of the Medical Gas Pipeline System (MGPS) at the Nottingham City Hospital. The purpose of the contract is to ensure the Authority complies with Health Technical Memorandum (HTM) 02-01 as well as applicable standards and relevant legislation. A copy of HTM 02-01 can be found on the NHS England website: - https://www.england.nhs.uk/estates/health-technical-memoranda/ The objective of the contract is to ensure the provision of safe and MGPS for administering of medical gases (E.g. oxygen) to patients under the care of the Authority. An MPGS comprises a source of supply, pipeline distribution system, terminal units (to which the user connects and disconnects medical equipment) and a warning/alarm system. Systems include for, but are not limited to, provision of oxygen, nitrous oxide and medical air for respiratory and surgical applications. To ensure the MGPS operates safely and reliably, the Authority requires a Supplier to provide regular planned preventative maintenance (PPM) to mitigate risks of faults or failures occurring. A minor issue, such as a leak in the pipeline for example, may have major consequences such as patient fatality as a result of oxygen deprivation. The PPM must be carried out in full accordance with the requirements of HTM 02-01 Part B (Operational Management Chapter 10 maintenance 10.1 to 10.161) and the Supplier must include all consumables and manufacturer’s identifiable parts for quarterly or annual routine servicing on all of the Authority’s medical gas pipe, plant and systems and include: - All plant equipment servicing as per manufacturer’s recommendations - Annual AGSS LEV testing and certification. - Dental air and vacuum. - Pathology Gases. The Services detailed in the associated procurement documents are deemed to be the minimum required to be undertaken during each quarterly and annual service visit. The Supplier shall be required, from time to time, to perform any other task required as part of the service in order for the relevant system(s) to remain compliant with HTM 02-01.

Timeline

Published Date :

19th Dec 2025 Today

Deadline :

30th Jan 2026 in a 1 month

Contract Start :

1st Dec 2026

Contract End :

30th Nov 2028

Tender Regions

Keywords

cable tray service

motorized door repair

switchgear calibration

HVAC blower maintenance

lift control panel fix

mechanical damper servicing

emergency lighting inspection

pump motor overhaul

genset diagnostics

fan coil unit tune-up

air handling unit repairs

ductwork welding

mechanical pump servicing

compressor replacement

fan belt change

boiler feedwater system overhaul

mechanical valve calibration

radiator flushing

heating coil clean

rooftop unit maintenance

Tender Lot Details

2 Tender Lots

Let’s Get you Started ✍

Get to see all tender details more briefly

Already have an account ?

Workflows

Status :

Open

Procedure :

N/A

Suitable for SME :

Yes

Nationwide :

No

Assign to :

Tender Progress :

0%

Details

Notice Type :

Tender

Tender Identifier :

IT-378-246-T: 2024 - 001

Tenderbase ID :

310724019

Low Value :

£100K

High Value :

£1000K

Buyer Information

Address :

Liverpool Merseyside , Merseyside , L13 0BQ

Website :

N/A

Procurement contact

Name :

Tina Smith

Phone :

0151 252 3243

Email :

tina.smith@shared-ed.ac.uk

Possible Competitors

1 Possible Competitors