Open Closing in a 2 months
Site Emergency Generator Maintenance
Descriptions
1. Project Objectives/Background 1.1. The contract is for a single supplier to provide Maintenance and Servicing to the Institute’s Standby generators. 2. Scope 2.1. In the event of failure to critical infrastructure the Institute must be able to rely on swift engineering attendance with diesel generators and associated cabling in a range from 500kVA to1500kVA engines within time measure associated with a high containment site. Suggested time frame is 4 hours between callout and site attendance. 2.1.1. Each generator requires two service visits per year, one minor and one major visit. 2.1.2. We expect to be advised of if any of the generators require changing or replacing items such as Oil require testing samples to verify this change. Oil/Air and fuel filters, coolant, Oil, fuel lines, fuel quality, plugs, leads etc. Service dates to be set out in advance between the Pirbright maintenance scheduler and company contact. Several visits may have to be arranged due to our building shutdown schedule so it may not be possible to service all the engines in one continuous site visit. It is also suggested that the site has a dedicated engineer who would seek to attain security clearance for the site so as to work independently of engineering services escorting engineers and to have a skill level where they are able to sign on and off work permits in advance and following servicing or breakdown or extra to contract works. 2.1.3. One essential requirement is to ensure power supplies remain on at all times, this is achieved through a series of UPS’s DRUPS and standby generators. 2.1.4. Subcontractors are expected to attain a high standard of maintenance, conducting themselves with professionalism and having an attitude of continuous improvement. The generator engineer will be reporting and working alongside the Site Electrical Supervisor to structure building “On/Off load” testing and maintenance. 2.1.5. It is preferable that the site has a dedicated maintenance engineer and a deputy who are security cleared to “Contractor Pass” level after site familiarisation and operation.
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
31122000 - Generator units
50532300 - Repair and maintenance services of generators
31160000 - Parts of electric motors, generators and transformers
31120000 - Generators
50000000 - Repair and maintenance services
31127000 - Emergency generator
Keywords
generator set
portable generator
industrial generator
backup generator
AC generator
DC generator
generator unit
power module
standby power unit
engine generator
auxiliary generator
emergency genset
standby generator
disaster recovery unit
UPS generator
motor parts
generator parts
transformer parts
rotor components
stator parts
equipment repair service
preventive maintenance program
troubleshooting visit
onsite repair support
maintenance contract service
repair diagnostics
component replacement service
service schedule planning
emergency repair team
calibration service
generator stator/rotor servicing
voltage regulator repair
bearing lubrication
brush gear servicing
excitation system tune-up
airflow cleaning
load bank testing
coupling alignment
shaft seal replacement
engine generator sync check
Tender Lot Details
2 Tender Lots
Workflows
Status :
Procedure :
Suitable for SME :
Nationwide :
Assign to :
Tender Progress :
Details
Notice Type :
Tender Identifier :
Tenderbase ID :
Low Value :
High Value :
Buyer Information
Name :
Procurement contact
Name :
Phone :
Email :
Possible Competitors
1 Possible Competitors
