Closed
C/407 - Pneumatic Tube Transport System
Descriptions
The project works are to Design, Supply, Install, Test and Commission (where applicable) and upgrade the existing system to an 18 station 6 Zone layout in accordance with the specification and proposed schematic layout. Removal of all of the existing tube system key components such as Stations, diverters, drive units etc. All existing stations are to be removed and to be replaced with 'New' ones. Second hand units will not be acceptable. The contractor has to provide documented evidence that the units that they are going to install have been manufactured within the last 6 months. No second hand equipment will be allowed as the provision for any station upgrade. The contractor must carry out the upgrade to the current network with the minimum of disruption, trying to maintain an operational system this site for as long as possible. As part of the process of the upgrade the contractor must make every effort to bring back on-line as many zones as possible with minimal delay, bringing the important acute zones back on first (zones containing: A&E, Pathology the deemed critical areas) or any zones that the Trust deem more important than any other one on their respective networks. The end system must come with a full 24 months warranty upon acceptance of the completed works.
Timeline
Published Date :
Deadline :
Contract Start :
Contract End :
Tender Regions
CPV Codes
50712000 - Repair and maintenance services of mechanical building installations
50000000 - Repair and maintenance services
42000000 - Industrial machinery
42120000 - Pumps and compressors
Keywords
industrial machinery
heavy machinery
production machinery
manufacturing equipment
industrial plant machinery
factory machinery
processing machinery
workshop equipment
industrial engines
plant machinery
industrial pumps
fluid compressors
air compressors
hydraulic pumps
centrifugal pumps
reciprocating compressors
vacuum pumps
rotary compressors
process pumps
compressor systems
equipment repair service
preventive maintenance program
troubleshooting visit
onsite repair support
maintenance contract service
repair diagnostics
component replacement service
service schedule planning
emergency repair team
calibration service
air handling unit repairs
ductwork welding
mechanical pump servicing
compressor replacement
fan belt change
boiler feedwater system overhaul
mechanical valve calibration
radiator flushing
heating coil clean
rooftop unit maintenance
Tender Lot Details
2 Tender Lots
Workflows
Status :
Assign to :
Tender Progress :
Details
Notice Type :
Tender Identifier :
TenderBase ID :
Low Value :
High Value :
Region :
Attachments :
Buyer Information
Address :
Website :
Procurement Contact
Name :
Designation :
Phone :
Email :
Possible Competitors
1 Possible Competitors
