ALIGN JV (Bouygues Travaux Publics, VolkerFitzpatrick and Sir Robert McAlpine) tenders

Align requires a subcontractor to carryout the Leather Lane FRC Construction Works.

Align requires a subcontractor to carryout the supply and install of highways drainage at our Amersham site.

The design, supply and installation of the Amersham gate. Note. All SHS are required to be galvanised before a PPC finish is applied.

This is the external works phase 2 package for three of our shaft locations.

This opportunity is for the detailed design, manufacture and supply of precast parapets for GMI/2. The proposed structure will be located near South Heath in Buckinghamshire. A new overbridge will provide vehicle and pedestrian access over the propos ....

Supply and delivery of pre-cleaned and sorted knapped/snapped flint, all from the same quarry. oSurface area of the wall at Amersham that needs to be faced with flints is 766m2 . oGabion baskets require 222m3.

The below opportunity is for the supply, install and configure of wireless CCTV towers. This will be a mixture of CCTV, PTZ and bullet cameras. Supplier to configure and set up CCTV control room

This opportunity consists Scaffolding & Access equipment for works at the North Portal (near Great Missenden) - works to include all supervision, labour, plant and materials for the dismantling of the Tunnel Boring Machines (TBM's)

To facilitate the construction of the Colne Valley Viaduct, Align JV had to construct a temporary Jetty over the various water courses around the Colne Valley region. This was formed of a tubular piled foundation, steel frame structure, and capped wi ....

The manufacture and delivery of the polyethylene (of equivalent material property) Shims and Wedges required to assist in supporting the precast viaduct segments on site for the High Speed 2 Section C1 project. The shim plates & wedges will be used t ....