Fabricaation of RO plant

Descriptions

Specification sheet for membrane plant:A membrane plant is required to process a high salinity feedwater (~40 g/L). The desired maximum production rate for permeate is 1 tonne per hour. The membrane plant should consist of:Pressure gauges.Permeate and retentate flow meters.Temperature sensor.Permeate conductivity meter.A suitable feed pump to allow 80bar normal operation.A recirculation pump to avoid mass transfer and fouling effects.A pressure relief system.A valve arrangement to facilitate use of one 8” membrane module or four 8” modules in parallel.A feed tank of 1000L.Ideally the plant will come on two frameworks, with the pumps and equipment on one frame and the membrane housings horizontally mounted vertically on top of one another on a second frame to meet with space constraints.The plant should be configured for manual operation; however, the pumps will be incorporated into an existing control system and will be operated and powered from there.NOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at https://www.sell2wales.gov.wales/Search/Search_Switch.aspx?ID=111352.