SSDbased DataProcessing Server - One SSD-based Data Processing Server -Supply and Maintenance

Descriptions

Full detailsavailable in theDocument section toupload.2 Specification ofRequirements Potential suppliersare welcome to quotefor upgrade optionsexceeding theseminimalrequirements. DIASwill ensure that allender bidders willhave an opportunityo quote for theactualspecifications ofhe winningsolution, either byrequesting updatedquotes from theender bidders orannouncing a newender. The minimalrequirements to bemet by the proposedsolution are asfollows:- 2 rack units sizemounted on movingrails;- at least 2redundant powersupplies;- 2 processors(Preferably Intelbased) with theminimal turbofrequency of 3.5GHz,4 memory channelsper processoroperating at theminimum speed of2133MHz each and 2processorsinterconnectchannels operatingat the minimum speedof 9.6 GT/s each;- at least 12physical cores perprocessor;- at least 512 GBRAM running at theminimum speed of2133MHz (all 8available processormemory channels mustbe in use);- two independentSSD arrays, each ofhem consisting of:- a hardware RAIDcontroller with atleast 2GB ofbattery-protected ornon-volatile memorycache, full supportof RAID6 and SSD I/Oacceleration(FastPath orequivalent ifavailable);- at least 8solid-state driveswith the minimumcapacity of 400GBper drive,sequentialread/write speedsnot lower than500MB/sec, random4KB read/writespeeds not lowerhan 50000/20000IOPs and writeendurance of atleast 0.3 drivewrites per day over5 years;- at least two SFP+1/10Gigabit EthernetPorts compatiblewith Intel ixgbeLinux driver;- an integratedremote accesscontroller providingvirtual console andvirtual mediafacilities as wellas IPMI 2.0 support;- no softwareinstallation orlicence is required.-All systemcomponents must becompatible withLinux. Compatibilitywith FreeBSD wouldbe a plus.