Bedfordshire Fire and Rescue Service tenders

Supply and Fit Dash Cameras, Communication Devices and Audible and Visual Vehicle Mounted warning Systems (Blue Lights)

Bedfordshire Fire and Rescue Authority operate a Fire Training Facility at its Training Centre in Kempston Fire Station, Southfields Road, Kempston, Bedfordshire MK42 7NR. The Fire Training Facility required repair and renovation of interior surfaces ....

Bedfordshire Fire and Rescue Authority have a requirement to upgrade the fuelling facilities at 6 Fire Stations located in the county of Bedfordshire. The works comprise of:- a. Move redundant fuel tank and dispenser from Kempston Fire Station and re ....

Bedfordshire Fire and Rescue Authority have a requirement for Grounds Maintenance, consisting of general landscaping, grass cutting, hedging and other associated works, at our 14 Community Fire Stations and Headquarters site located in the county of ....

Bedfordshire Fire and Rescue Authority has a requirement to replace both the high and low pressure air bags on all Rescue Appliances (RA) and Specialist Rescue Units (SRU) as detailed in the tender pack.

Bedfordshire Fire and Rescue Authority has a requirement for three electrically powered washing machines based at its sites at Bedford, Kempston and Dunstable. There is also a requirement to de-install and remove existing washing machines from its si ....

The provision of SIP trunks for IP telephony in support of the unified communications strategies of Bedfordshire Fire and Rescue Authority and Cambridgeshire and Peterborough Fire Authority.

Bedfordshire Fire and Rescue Authority operate a Fire Training Facility at its Training Centre in Kempston Fire Station, Southfields Road, Kempston, Bedfordshire MK42 7NR. The Fire Training Facility requires repair and renovation of interior surfaces ....

Bedfordshire Fire and Rescue Authority ("BFRA") has awarded a contract for the roof covering upgrade to Harrold and Luton Fire Stations.

BFRA has awarded a contract for an electrical upgrade to a CANbus controlled system, on three Scania appliances fitted with a failed engineering system together with associated wiring looms. These appliances were manufactured in 2009.